Re: Routing between vlan within a cisco3550 router?
Sounds like you have a L3 problem. Try extended ping:
1. from 192.168.70.254 to 192.168.80.1
2. from 192.168.70.254 to 192.168.80.254
3. from 192.168.80.254 to 192.168.70.1
4. from 192.168.80.254 to 192.168.70.254
If both 2&4 are fine but 1&3 are not then you might have the default gateway on the PCs set incorrectly. If all 4 cases work then I guess ... send out an outage notification and give the switch a kick. :-)
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...