Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

routing IP traffic to different hosts

I have two connecting services to the internet, a T1 and DSL. The two services are connected to separate firewalls. Each firewall has it's own IP address. I want to separate traffic to the units and would like to route all VPN traffic over the T1 and all other traffic over the DSL. I have a Cisco 2601 with IOC C2600-IS-M version 12.0(14). This router was originally used to bridge our old Token-ring and ethernet networks. How do I need to change my configuration to perform this? What entries do I need to make for this to occur?

2 REPLIES
Silver

Re: routing IP traffic to different hosts

ip route 1.1.1.0 255.255.255.0 10.1.1.1(this will route all traffic to 1.1.1.0/24 to next hop 10.1.1.1

ip route 0.0.0.0 0.0.0.0 11.1.1.1(this will route all traffic that does not match the first statement to next hop 11.1.1.1.

rtra s0 10.1.1.2>>>>>>>>>> 10.1.1.1 VPN RTR 1.1.1.0

s1 11.1.1.2>>>>>>>>> 11.1.1.1 DSL RTR

Keep in mind you must have routes back from your pix that point to your local subnet

New Member

Re: routing IP traffic to different hosts

What are the entries for rtra and s1?

112
Views
0
Helpful
2
Replies
CreatePlease to create content