Gateway of last resort is 10.1.7.1 to network 0.0.0.0
c 172.25.0.0/16 is directly connected, Vlan40
10.0.0.0/24 is subnetted, 1 subnets
c 10.1.7.0 is directly connected, Vlan60
c 192.168.2.0/24 is directly connected, Vlan10
S* 0.0.0.0/0 [1/0] via 10.1.7.1
From the 10.1.7.0 network, I am able to connect to the 172.x.y.z network, but I am not able to go from the 172.x.y.z to the 10.1.7.0 network.. I would guess I am missing a route, any thoughts or assistance?
It would help if we knew a little more about your environment. from what you have posted it looks like you have configured VLAN 40 to be the class B address of 172.25.0.0 255.255.0.0 and have configured VLAN 60 o be a subnet of network 10.1.7.0 255.255.255.0.
When you describe being able to connect or not able to connect, is this from some end station within each VLAN or is it from the 3750 itself?
It might be easier for us to understand and suggest solutions if you would post the configuration of the 3750 (or at least these VLAN interfaces).
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.