Can someone help?? I have a wan of 9 sites that are using ospf over frame with isdn backup. Site A is the core site. At the core site is a Unix server running telnet and ftp connection software. Site B has a managed satalite connection to a manufacturer. The manufact. will only accept local lan traffic. Nat can be used to provide conectivity. Can I use Nat on my existing 2610 routers or do I have to deploy a Integration router.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...