routing on 4006 with sup III

[jim.davey]

I have a 4006 with a Sup III. I have 3 VLANs configured on this switch and have a Cisco 4700 connected to one of the Fast Ethernet ports of the switch, this port is a member of one of the 3 VANs. I have enabled eigrp 2 on the 4006 and was just expecting it to receive updates from the 4700 router... But this is not the case so I'm obviously missing something (probably something very obvious). What do I need to do to get the routing updates from the 4700 router into the 4006 switch? At the moment the 4006 knows about all connected VLANs but thats it.

Thanks.

[Prashanth Krishnappa]

Have you configured Layer 3 VLAN interfaces and given the network numbers under your EIGRP configuration. Paste the relevant info from both the 4006 and the 4700

[rfroom]

What is the trunking configuration going to 4700? Please post that configuration from both the 4700 and 4000. Make sure your native VLAN is configured correctly.