We have a strange issue where on 2 locations we have a 7500 and a 6509 each both sites are connected to each other by MAN (2GB on the 6509) and WAN (OC3 on the 7500) the 7500 and the 6509's are interconnected by 100Mb interfaces. Now we have on site A a OC3 to another site this other site is our gateway of last resort.
On site B we have other links coming in and when we try to connect from one of those sites to a site that is not in the routing table it looses smoe packets before it connects. the main route for this is:
remote site -> site B 7500 -> site B 6509 MSFC -> site A 6509 MSFC -> site A 7500 -> site with the host
Routing Protocol used: EIGRP
Anybody encountered this type of losses on this type of connection?
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.