01-23-2003 01:56 AM - edited 03-02-2019 04:27 AM
---------------------| |------------
msfc1(.249)----| |msfc3(.251)
--------------------|-trunk---|------------
msfc2(.250)----| |msfc4(.252)
----- ---------------| |------------
HSRP are configed on all four msfc of 6509 which ios version is 12.1(2)E ,one is active,one is standby and other two msfc is listen.
pc6:one pc of vlan 6,ip is 10.1.6.2
pc1:one pc of vlan 1,ip is 10.1.1.2
HSRP of vlan 6:
.251 is active,.250 is standby,.249 and .252 is listen
HSRP of vlan 1:
.252 is active,.249 is standby,.250 and .251 is listen
when I ping(s=10.1.6.2,d=10.1.1.2),ping will always fail,and arp entry of 10.1.6.2 is not exist on msfc4 ,
BUT if I ping(s=10.1.6.2,d=10.1.6.252),ping success,then ping(s=10.1.6.2,d=10.1.1.2) will success.
I think the packet flow is:
pc6---.253 of vlan 6-----.251 of vlan 1----pc1----.253 of vlan 1-----.252 of vlan 6--?????(I think arp doesn't do)--pc6
so I think maybe listen router will do nothing about arp.
I use bug toolkit to find nothing about it.
anybody can help me? thanks,and any comment is appreciated.
flowchart:
msfc3#sh standby brief
P indicates configured to preempt.
|
Interface Grp Prio P State Active addr Standby addr Group addr
Vlan1 1 50 P Listen 10.1.1.252 10.1.1.249 10.1.1.253
Vlan6 2 200 P Active local 10.1.2.250 10.1.2.253
msfc3#sh ip arp | include 10.1.1.2
Protocol Address Age (min) Hardware Addr Type Interface
Internet 10.1.1.2 4 0030.6e01.cd99 ARPA Vlan1
msfc3#sh ip arp | include 10.1.6.2
Protocol Address Age (min) Hardware Addr Type Interface
Internet 10.1.6.2 4 0030.6e01.f899 ARPA Vlan6
msfc4#sh standby brief
P indicates configured to preempt.
|
Interface Grp Prio P State Active addr Standby addr Group addr
Vlan1 1 200 P Active local 10.1.1.249 10.1.1.253
Vlan6 6 50 P Listen 10.1.6.251 10.1.6.250 10.1.6.253
msfc4#sh ip arp | include 10.1.1.2
Protocol Address Age (min) Hardware Addr Type Interface
Internet 10.1.1.2 4 0030.6e01.cd99 ARPA Vlan1
msfc4#sh ip arp | include 10.1.6.2
msfc4#****nothing******
ping(s=10.1.6.2 d=10.1.1.2) fail
msfc4#sh ip arp | include 10.1.6.2
msfc4#*****nothing******
ping(s=10.1.6.2,d=10.1.6.252) successs
msfc4#sh ip arp | include 10.1.6.2
Protocol Address Age (min) Hardware Addr Type Interface
Internet 10.1.6.2 1 0001.030e.5c8e ARPA Vlan6
then:
ping(s=10.1.6.2 d=10.1.1.2) success
01-29-2003 07:59 AM
Have you seen this discussion....
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: