I need to find a reasonably priced 2 port router for connecting between a Meridian telephone switch and our office Lan for Meridian management. The router will only be required to isolate the Meridan from Lan broadcast traffic and allow all any other traffic through. A 2 Ethernet port 2600 is the expensive option, but is this something the 501 could do? Fixed IP addresses would be needed on each ethernet (vlan) port.
The PIX will not carry out routing functions as such and will therefore not be used just to limit broadcasts. You could put the Meridian behind the PIX and use NAT to hide its real address, you could then set up rules as to which stations etc can manage it.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.