I have two cisco 3640 routers one for mumbai and other for delhi. We have registered IP of class 10.26.11.0 and using subnet mask of 255.255.255.128.
On serial link can we use the same network with diffrent subnet like 10.26.11.0 with mask of 255.255.255.252. Currently we are using 188.8.131.52 on serial link. At mumbai we have 10.26.12.0 with mask 255.255.255.0.
You will not be able to use 10.26.11.0 with mask 255.255.255.252 on that routers serial interface as it will give you 2 hosts .1 and .2 which are already present on your ethernet. Instead you should use 10.48.11.128 with subnet mask 255.255.255.252. In this way 10.26.11.0/25 and 10.26.11.128/30 are two different networks present on 2 separate interfaces on the same router.
use google.com search engine to see IP subnetting topics on the web
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.