well... assuming all routing protocol are working properly.. you will need to enable proxy arp on the 172.30.x.x/16 routing interface...
when a host from the 172.30.x.x/16 wants to send traffic to 172.30.24.0/24, the host won't send it to its default gateway right the way because it think 172.30.24.0 is within its own broadcast domain. It will send an ARP request to its local subnet first.
With proxy arp enabled, the 172.30.x.x/16 routing interface will respond to the ARP request with its MAC address... then the host to start forwarding the packets destined to 172.30.24.0/24 to 172.30.x.x/16 routing interface.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...