I have a question. I have more then 24 vlans defined in msfc. Most of vlan interfaces have ip helper-address for different server. Im implementing a NIS broadcast for one vlan by enabling the IP FORWARD PROTOCOL UDP RPC as global command. The problem is now all vlan also allowing the rpc traffic. There is any way to filter or stop just traffic?
I'm planning to configure extended sccess-list. But, I like to know if there is any other solution and if i have to implement access list with ip directed broadcast there is any URL where I can find the example configuration.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...