Has anyone worked with inter-vlan routing on a 4003 routing module? I have only worked with the Cat6009 where we define Vlans an interfaces and assign networks to those interfaces. I recently inherited a 4003 which has vlans that seem to be routed via Port Channels. What I am looking for is some sample configuration or maybe documentation even tips regarding inter-vlan routing between the 4003 switching and routing module.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...