Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

rsm on cat 4006

On router module for cat 4006 (WS-x4232-L3) RSM 34 port card. I want to use

2 gibic port as normal trunk port for 2 different Vlan of 3548.

how do i do it.

thanks

4 REPLIES
Cisco Employee

Re: rsm on cat 4006

The 2 gbic ports are routed ports. So you'll need to configure them from the RSM and use sub-interfaces for trunking

New Member

Re: rsm on cat 4006

can u tell me the list of command and procedure for applying the same..

Cisco Employee

Re: rsm on cat 4006

It is similar to what you would do on a router

interface GigabitEthernet1

no ip address

no ip directed-broadcast

no ip mroute-cache

!

interface GigabitEthernet1.1

encapsulation dot1Q 1 native

ip address 10.1.1.1 255.255.255.0

no ip directed-broadcast

!

interface GigabitEthernet1.2

encapsulation dot1Q 2

ip address 20.1.1.1 255.255.255.0

no ip directed-broadcast

And so on.....

New Member

Re: rsm on cat 4006

solved

85
Views
0
Helpful
4
Replies