Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

RSM Reloading

I have a cat5500 with the rsm blade, (rsp2) using version 12.2(17a)and have started having this problem. The router will freeze, and then reload a portion of the code, but traffic stops while this is happening, I reload the full switch and it stops for about a month, but then starts again getting worse until it happens every couple of hours. Here is the example logs produced:

*Sep 25 00:37:41: %C5IP-0-MSG: slot0 %DB-0-RESTART: Waiting for restart

*Sep 25 00:37:42: %CBUS-3-CMDTIMEOUT: Cmd timed out, CCB 0x5800FF20, slot 0, cmd

code 2

-Traceback= 603FE914 603FEDC0 603F6BC4 603F4904 6030DFF4 6030E1EC

*Sep 25 00:37:42: %DBUS-3-DBUSINTERR: Slot 0, Internal Error

*Sep 25 00:37:45: %RSP-3-RESTART: cbus complex

*Sep 25 00:38:09: %LINK-3-UPDOWN: Interface Vlan0, changed state to up

*Sep 25 00:38:11: %LINK-3-UPDOWN: Interface Vlan10, changed state to up

*Sep 25 00:38:11: %LINK-3-UPDOWN: Interface Vlan20, changed state to up

*Sep 25 00:38:11: %LINK-3-UPDOWN: Interface Vlan21, changed state to up

*Sep 25 00:38:11: %LINK-3-UPDOWN: Interface Vlan110, changed state to up

*Sep 25 00:38:11: %LINK-3-UPDOWN: Interface Vlan150, changed state to up

*Sep 25 00:38:11: %LINK-3-UPDOWN: Interface Vlan200, changed state to up

I found a bug about the same error message cmd-timeout but has no info about how to fix it or what version will repair it. I can't afford the support on the device yet, so any help you provide would be greatly appreciated.

Thank You,

Jerel Howland

Senior Systems Engineer

1 REPLY
Silver

Re: RSM Reloading

The bug that you are referring to is CSCdm92277. The bug has been resolved in version 12.0(4.6)W05(13.00.02). Since you are running a current version there should not be a probelm. You might have to explore other possiblities. The following document might help.

http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_tech_note09186a00800cdd51.shtml

101
Views
0
Helpful
1
Replies
CreatePlease to create content