We have a switched network with Cat 5500 running on both, the 12 floors and on the 2 backbone switches. The backbone is collapsed and each Cat 5500 switch has the RSM. We are running LMS 2.1 for monitoring and started getting the following messages this morning:
InCharge Domain : DFM RSM RSM-172.21.72.1-10 ResourceException - System is experiencing resource problems, e.g., CPU or memory problems.
InCharge Domain : DFM RSM RSM-172.21.72.1-10 OperationalException - This system or the components of this system are not functioning properly
These are the only two messages we have received this morning. I also brought up the DFM and did not see any error messages in it. Telnetting into the RSM did not show any error messages either and no complain from the users so far.
Can anybody please tell me what other testings I can do to shed the light on this problem?
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...