I have some CatOS 4006's (ver 7.4(3)) I have set RSPAN up on. Source port on one 4006 direct fiber connected to another 4006 that has the RSPAN destination. When I look at the sniffer trace some of the packets are out of order. Example - Ping reply before the Ping request. I talked to the sniffer company who said they display packets as they see them. It seems that it is just some of the packets at the beginning of the trace are out of order not all packets. Does anyone know of any bugs or troubleshooting steps I might take? SPAN works great - just not RSAN. Thanks!
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...