07-24-2002 12:10 PM - edited 03-02-2019 12:08 AM
all - i am familiar with saving my router configs to my tftp server (copy run tftp), but how do i save all of my configurations of my set based switchs to the tftp server?
07-24-2002 12:26 PM
copy config tftp
Tim
07-24-2002 01:04 PM
my only options are:
copy tftp flash
copy flash tftp
07-24-2002 01:15 PM
Copy flash tftp is *not* going to copy your configuration, it is going to copy a file on your flash filesystem. This could be a config, but only if you have saved it there first.
The correct command is copy config tftp, as I already said.
07-24-2002 02:42 PM
what code and supervisor are you running? Please post a sh ver.
07-24-2002 03:00 PM
show ver
WS-C5500 Software, Version McpSW: 4.5(6) NmpSW: 4.5(6)
Copyright (c) 1995-2000 by Cisco Systems
System Bootstrap Version: 2.4(1)
Hardware Version: 1.3 Model: WS-C5500
07-24-2002 03:01 PM
show ver
WS-C5500 Software, Version McpSW: 4.5(6) NmpSW: 4.5(6)
Copyright (c) 1995-2000 by Cisco Systems
System Bootstrap Version: 2.4(1)
Hardware Version: 1.3 Model: WS-C5500
07-24-2002 03:07 PM
which supervisor (sh mod 1)?
07-24-2002 03:57 PM
If you have a Sup1 or a Sup2, try the "write network" command
http://cio.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_4_5/cmd_ref/sl_w_cmd.htm#13013
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: