I have configured some vlans using a cisco catalyst 2950 switch and a cisco 2611 XM router. I configurated the router for intervlan routing with encapsulation 802.1q and all is running good. Now I started with introducing some access policies between vlans by the use of acls but it seemed to me I have not clear the packet filtering mechanism (e.g. inbound versus outbound packets, etc.). I succeded in stopping access between 2 vlan in bidirectional way, but I don't know the best way to permit traffic from vlan1 to vlan2 while stopping traffic from vlan2 to vlan1.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.