Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Serial0/0/0:23 is up, line protocol is up (spoofing) - Help

I am trying to get my isdn working. I need assistance in troubleshooting this error message.

NNN0R011#sh int serial 0/0/0:23

Serial0/0/0:23 is up, line protocol is up (spoofing)

Hardware is DSX1

MTU 1500 bytes, BW 64 Kbit, DLY 20000 usec,

reliability 255/255, txload 1/255, rxload 1/255

Encapsulation HDLC, loopback not set

Last input 00:00:03, output never, output hang never

Last clearing of "show interface" counters never

Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0

Queueing strategy: weighted fair

Output queue: 0/1000/64/0 (size/max total/threshold/drops)

Conversations 0/1/256 (active/max active/max total)

Reserved Conversations 0/0 (allocated/max allocated)

Available Bandwidth 48 kilobits/sec

5 minute input rate 0 bits/sec, 0 packets/sec

5 minute output rate 0 bits/sec, 0 packets/sec

1722 packets input, 6556 bytes, 0 no buffer

Received 0 broadcasts, 0 runts, 0 giants, 0 throttles

1 input errors, 1 CRC, 0 frame, 0 overrun, 0 ignored, 1 abort

Please help

2 REPLIES
New Member

Re: Serial0/0/0:23 is up, line protocol is up (spoofing) - Help

what is the error message ? also please send the output of debug isdn q931 too .

Silver

Re: Serial0/0/0:23 is up, line protocol is up (spoofing) - Help

There is no error in your display. If you are concerned about the up/up spoofing, then that is normal behavior. The D-channel is kept up spoofing to keep the ISDN switch and the router talking..Do you still have an error or an issue??

2787
Views
5
Helpful
2
Replies
CreatePlease login to create content