Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Session timeout for ISDN TA

We have a mixture of async modems and ISDN TAs dialing into our Cisco 3640, which has multiple PRI and 30 DigModem modules.

We can set an "absolute-timeout" on the Line interface for the modem connections.

How can we set a similar session timeout for the ISDN TA users who are dealt with from the Dialer Interface only ?

Radius Attribute 26 is not supported and there appears to be no IOS command.

1 REPLY
Anonymous
N/A

Re: Session timeout for ISDN TA

You need to use the DDR commands:

dialer-group X

dialer-idle Y

dialer-list X protocol IP deny

In this way no traffic is interesting,

so after Y seconds the line will be disconnected.

91
Views
0
Helpful
1
Replies