Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

setting up bandwidth

I have cisco 3600 router at head office connected to branch office at 128kbps leased line and the branch office is connected to sub branch office at 64 kbps spedd.

<p>

I have to reserve the bandwidth from head office to branch office at 64 kbps

and head office to sub branch 64 kbps

how I can I set the bandwidth

1 REPLY
Anonymous
N/A

Re: setting up bandwidth

You can use CBWFQ on branch router. Let sub-branch office to be connected in 'int1-name', branch office LAN on 'int2-name', headquters on 'out-name'

class-map INT1

match input-interface 'int1-name'

class-map INT2

match input-interface 'int2-name'

policy-map TO_HEAD

class INT1

bandwidth 64

class INT2

bandwidth 64

int 'out-name'

service-policy output TO_HEAD

That way you divide the bandwidth fifty-fifty but only on-way: from branch offices to headquters. To make it two-ways you must use CBWFQ also on head router. Let ACL1 describe traffic to branch office, ACL2 describe traffic to sub branch office, and 'out-name' is an interface directed to branch office:

class-map INT1

match access-group ACL1

class-map INT2

match access-group ACL2

policy-map TO_BRANCH

class INT1

bandwidth 64

class INT2

bandwidth 64

int 'out'

service-policy output TO_BRANCH

95
Views
0
Helpful
1
Replies
CreatePlease login to create content