Is it possible to force a script to be ran on a machine after they connect to the AS5300 or any other Access Server?
We have a script that will scan a machine to see if NAV and the most current updates are loaded. We can push is to our LAN users at startup or login, but how can I force this scan to run on dial up machines.
I am not sure if I have understood your question correctly. If the dial-up users are going to login to the same server, then the same script can be invoked for them as for the LAN users. The access-server need not do anything in such a scenario.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...