Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Sh buffers output...

If I am to understand this correctly...our buffers are getting full (likely because the device this router is attached to can not keep up)?

Public buffer pools:

Small buffers, 104 bytes (total 50, permanent 50, peak 99 @ 2w1d):

46 in free list (20 min, 150 max allowed)

7935483 hits, 2020 misses, 1826 trims, 1826 created

332 failures (0 no memory)

Middle buffers, 600 bytes (total 25, permanent 25, peak 43 @ 5w4d):

24 in free list (10 min, 150 max allowed)

2828619 hits, 337 misses, 232 trims, 232 created

85 failures (0 no memory)

Big buffers, 1536 bytes (total 50, permanent 50):

50 in free list (5 min, 150 max allowed)

227997 hits, 0 misses, 0 trims, 0 created

0 failures (0 no memory)

VeryBig buffers, 4520 bytes (total 10, permanent 10):

10 in free list (0 min, 100 max allowed)

0 hits, 0 misses, 0 trims, 0 created

0 failures (0 no memory)

Large buffers, 5024 bytes (total 0, permanent 0):

0 in free list (0 min, 10 max allowed)

0 hits, 0 misses, 0 trims, 0 created

0 failures (0 no memory)

Huge buffers, 18024 bytes (total 1, permanent 0, peak 2 @ 3w4d):

1 in free list (0 min, 4 max allowed)

16 hits, 1 misses, 231 trims, 232 created

0 failures (0 no memory)

2 REPLIES
Silver

Re: Sh buffers output...

New Member

Re: Sh buffers output...

Carbon based error on our end.

237
Views
5
Helpful
2
Replies