Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Sh Interface status

Hi! What's the command for sh interface status in CAT OS?

Thks!

1 ACCEPTED SOLUTION

Accepted Solutions

Re: Sh Interface status

Hi Friend,

You will not get the exact output as you get is IOS but you can take the output from this commands

sh port

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_8_5/cmd_ref/sh_p_sn.htm#wp1715472

sh mac

Have a look at this for details on "sh mac" command

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_8_5/cmd_ref/sh_ml_n.htm#wp1028548

HTH, if yes please rate the post.

Ankur

1 REPLY

Re: Sh Interface status

Hi Friend,

You will not get the exact output as you get is IOS but you can take the output from this commands

sh port

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_8_5/cmd_ref/sh_p_sn.htm#wp1715472

sh mac

Have a look at this for details on "sh mac" command

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_8_5/cmd_ref/sh_ml_n.htm#wp1028548

HTH, if yes please rate the post.

Ankur

480
Views
0
Helpful
1
Replies
CreatePlease to create content