Solved: Sh Interface status - Cisco Community

723

Views

0

Helpful

1

Replies

Hi! What's the command for sh interface status in CAT OS?

Thks!

1 Accepted Solution

Accepted Solutions

Hi Friend,

You will not get the exact output as you get is IOS but you can take the output from this commands

sh port

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_8_5/cmd_ref/sh_p_sn.htm#wp1715472

sh mac

Have a look at this for details on "sh mac" command

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_8_5/cmd_ref/sh_ml_n.htm#wp1028548

HTH, if yes please rate the post.

Ankur

View solution in original post

1 Reply 1

Hi Friend,

You will not get the exact output as you get is IOS but you can take the output from this commands

sh port

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_8_5/cmd_ref/sh_p_sn.htm#wp1715472

sh mac

Have a look at this for details on "sh mac" command

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_8_5/cmd_ref/sh_ml_n.htm#wp1028548

HTH, if yes please rate the post.

Ankur

Learn, share, save

Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.

New here? Get started with these tips. How to use Community New member guide

Log in to Community