hi,
i configured the following on a 3725 router with 12.2.8T5:
policy-map rrw_512
class rrw_gold
bandwidth percent 30
class rrw_silber
bandwidth percent 30
class rrw_stahl
bandwidth percent 30
class class-default
fair-queue
!
policy-map btu-wien
class class-default
set ip precedence 3
shape average 486000 48600 48600
service-policy rrw_512
!
!
interface Tunnel2
description RRW-Zentrale: zum OOE-Haus-Wien(BTU) - RRW-Tunnel (Tu2)
bandwidth 512
ip address y.y.y.y 255.255.255.252
ip mtu 1500
load-interval 30
keepalive 10 3
qos pre-classify
service-policy output btu-wien
tunnel source x.x.x.x
tunnel destination x.x.x.x
!
As soon as the traffic rate goes over the configured shape-value, the router produces corrupted pakets.
I observed this with a sniffer -
I tried already with/without and bigger bc,be - no success.
any idea ?
