Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Shiva Access port d

Does anybody out there know if I can get a Shiva ISDN Accessport/D ISDN router to work with a Cisco 2500 Bri interface using dialer map etc. I can get the two to make calls to eachother and authnticate but thats all.

1 REPLY
Bronze

Re: Shiva Access port d

If the two can call each other and authenticate, then I assume your problem is connectivity? In general, this should work fine. As long as you have a dialer map configured on the 2500 for the remote Shiva (or a dynamic map will be created for dialin sessions if authentication is enabled) and a dialer-group, you should be OK. You may want to have a look at "debug ppp neg" to see that IPCP completes and both ends agree on the IP address of each other.

111
Views
0
Helpful
1
Replies