Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

Show Controllers cbus for CIP2

Hello.

Can anyone explain (in details) the meaning of the following lines, taking out of the show controller cbus for CIP2:

Load metrics:

Memory dram 28155800/64M

CPU 1m 8%, 5m 8%, 60m 9%

DMA 1m 1%, 5m 1%, 60m 1%

Vir0 1m 5%, 5m 5%, 60m 6%

I would like to know:

Does the CIP use 28155800 Bytes out of 64M or does it have 28155800 Bytes free ?

This is the complete output:

slot5: CIP2, hw 5.00, sw 27.18, ccb 5800FF70, cmdq 480000A8, vps 8192

software loaded from flash slot1:cip27-18_kernel_hw5

Loaded:seg_802 Rev. 0 Compiled by cip-release on 24-May-2001

Loaded:seg_csna Rev. 0 Compiled by cip-release on 24-May-2001

Loaded:seg_pca Rev. 0 Compiled by cip-release on 24-May-2001

Loaded:seg_tcpip Rev. 0 Compiled by cip-release on 24-May-2001

Loaded:seg_tn3270 Rev. 0 Compiled by cip-release on 24-May-2001

EPROM version 2.1, VPLD version 5.9

PCA0: hw version 01, microcode version C1010000

Load metrics:

Memory dram 28155800/64M

CPU 1m 8%, 5m 8%, 60m 9%

DMA 1m 1%, 5m 1%, 60m 1%

Vir0 1m 5%, 5m 5%, 60m 6%

Channel5/0

gfreeq 48000168, lfreeq 480001B8 (4512 bytes)

rxlo 4, rxhi 157, rxcurr 1, maxrxcurr 18

txq 480001C0, txacc 4800032A (value 104), txlimit 104

Channel5/2

gfreeq 48000168, lfreeq 480001C8 (4512 bytes)

rxlo 4, rxhi 157, rxcurr 4, maxrxcurr 17

txq 480001D0, txacc 48000332 (value 104), txlimit 104

Channel5/2, txq 480001D0, txacc 48000332 (value 104), txlimit 4

Thank you.

1 REPLY
Bronze

Re: Show Controllers cbus for CIP2

The first figure is the amount of free memory ie the CIP has 28155800 bytes available.

97
Views
0
Helpful
1
Replies
CreatePlease to create content