show installed cards

[grunky]

I have a 7206vxr and don't know what command, if any, will display the make and model of cards we have installed in the router.

I'm working on a script that telnets into the router, runs command abc - and from that, easily see what cards are where.

A 'show version' only shows what interfaces are available, showing the running-config shows what interfaces are in what slot - however both of these aren't specific enough.

[mark-obrien · Accepted solution]

Try the "show diag" command. It reports on the card in each slot. Here is a link to the command description:

http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/ffun_r/ffrprt3/frf013.htm#1020428

HTH

Mark