show mac-address with SNMP

[djoseangel]

It's possible to obtain the same result than the command "sh mac-address" in a Catalyst with SNMP; if that's the case what's the suitable MIB variable?

[rmushtaq]

You can look at the BRIDGE-MIB and objects like dot1dTpFdbTable.

[djoseangel]

I tried before, and it's not the same result, for example if the switch is connected to a router with the command "sh mac-address" the mac of the router appear, but itdoesn't int the BRIDGE-MIB.