Update. Forgot some info. Also looked at interrupt troubleshooting doc and did steps there and everything is fine there. CEF is running everywhere and hardly any drops, everything fast/CEF switched under show int switching, etc.
One line in the interrupt troubleshooting said voice ports count for CPU but thats about it in troubleshooting doc. This has a PRI for IPT/VoIP and 2 T3s so lots going on. Every serial interface is a PPP link to remote site with LLQ.
I realize 15-20% is good, but need to be able to better explain where the % number is coming from and be able to back it up with client.
Check the output of show align--if there's nothing recorded there, then this is straight traffic switching, which happens in interrupt context on this router. It sounds like normal operation, to me....
If you're interested in a detail explaination, take a look at inside cisco ios software architecture.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.