Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Community Member

Show X25 display explanation

Each time we issue show x25 , we received info that are not clear in our mind

Could you clarify the meaning of parameter marked with **

SHOW X25 SERVICE result :

===================================================

3620£sh x25

X.25 software, Version 3.0.0.

2 configurations supporting 2 active contexts ** (??)

VCs allocated, freed and in use: 573 - 496 = 77 ** (allocated = freed.in use ??

VCs active and idle: 75, 2 ** (what is the meaning of idle ?? , is that idle timer value or what ??)

XOT software, Version 2.0.0.

VCs allocated, freed and in use: 531 - 505 = 26 (1 idle)

connections: 0 outgoing, 1 incoming, 25 active, 0 orphaned, ***

(in my case, the 25 XOT CVs were established as outgoing XOT packets ???

0 idle; 26 total

active VCs: 25, connected to 1 remote hosts

Could you also explain us what action is resetting those values : X25 call reset/reload ??

many thanks for your help .pascale

.

1 REPLY

Re: Show X25 display explanation

Since there has been no response to your post, it appears to be either too complex or too rare an issue for other forum members to assist you. If you don't get a suitable response to your post, you may wish to review our resources at the online Technical Assistance Center (http://www.cisco.com/tac) or speak with a TAC engineer. You can open a TAC case online at http://www.cisco.com/tac/caseopen

If anyone else in the forum has some advice, please reply to this thread.

Thank you for posting.

90
Views
0
Helpful
1
Replies
CreatePlease to create content