Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

shutting down a atm interface configured in a pvc range

I need to temporarily disable a atm interface configured in a pvc range. The need for this is to suspend a customer for non pay without going out to the remote cabnet and pulling wires. The problem I am having is you can't get into the interface if it is configured in a range. If you have any other suggestions I could try that would be great. They are on a DHCP range and we are not using PPPOE, so denying IP's or user names wont work.

Thanks for the help,

JT

2 REPLIES
Silver

Re: shutting down a atm interface configured in a pvc range

Check this links which talks about configuring and deactivating an individual pvc within a range, hope that helps.

http://www.cisco.com/en/US/products/sw/iosswrel/ps1834/products_feature_guide09186a008008039b.html#1020780

Anup

New Member

Re: shutting down a atm interface configured in a pvc range

That is what I needed. I don't know why I couldn't find it.

Thanks for the help Anup,

JT

82
Views
0
Helpful
2
Replies
CreatePlease to create content