Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
New Member

Site to site VPN using Dynamic IP on Meraki MX 64

Dears, I have to configure Site to site VPN using Dynamic IP on Meraki MX 64 Device to connect non meraki devices.

Both device will support static IP. but non meraki device have broad band connection using, DynDNS Pro service to connection branch offices. DynDNS should not support Meraki device. how i can use DynDNS service for creating site to site VPN from Meraki ME 64 to non meraki device. 

Any input would be greatly appreciated.

Everyone's tags (1)
3 REPLIES
VIP Purple

What is the remote VPN

What is the remote VPN concentrator?

Silver

It is quite recommended to

It is quite recommended to establish VPN connection using Static IP address
The only way to deploy Dynamic IPs on VPN deployments is if you have DNS entries (name to IP) existing in the global DNS realm.

Even that, having dynamic IPs can be very unstable, considering if the IP changes, the connection needs to get re-established e.g., connections will be lost



Meraki MX appliances have

Meraki MX appliances have dynamic DNS included.  Look at the appliance status page and you will see dynamic DNS name.  What type of other device are you connecting to?  There are some guides at Meraki documentation site.

-- please remember to rate and mark answered helpful posts --
803
Views
0
Helpful
3
Replies
CreatePlease to create content