09-28-2003 09:22 PM - edited 03-02-2019 10:38 AM
Hi,
I'm using SLM 2.0 to do a roundtrip icmpecho on some of my routers. (router ios is 12.1E)
However, after enabling the SLC, i realise that my router does not show the correct target IP address.
My IP is 10.152.30.33, instead i get 10.63.30.33
I get the below from my router when i do a " sh rtr configuration ".
Entry Number: 3
Owner: 5:slmuser:IcmpEcho@@116@@nwhq01@@1064803881991:10.152.30.33
Tag: 3
Type of Operation to Perform: echo
Reaction and History Threshold (milliseconds): 200
Operation Frequency (seconds): 300
Operation Timeout (milliseconds): 5000
Verify Data: FALSE
Status of Entry (SNMP RowStatus): active
Protocol Type: ipIcmpEcho
Target Address: 10.63.30.33
Source Address: 0.0.0.0
Target Port: 0
Source Port: 0
Doing a sh rtr collection -statistics give me a time-out as below:
Entry Number: 3
Modification Time: 12:46:30.000 CCT Mon Sep 29 2003
Diagnostics Text:
Last Time this Entry was Reset: Never
Number of Octets in use by this Entry: 2802
Connection Loss Occurred: FALSE
Timeout Occurred: TRUE
Over Thresholds Occurred: FALSE
Number of Operations Attempted: 2
Current Seconds Left in Life: 2147483647
Operational State of Entry: active
Latest Completion Time (milliseconds): 0
Latest Operation Start Time: 12:51:30.000 CCT Mon Sep 29 2003
Latest Operation Return Code: timeout
Latest 10.63.30.33
Any advice appreciated.
Thanks.
Solved! Go to Solution.
10-06-2003 07:19 AM
Seems like its hitting the bug CSCdv43095. The workaround given in the bug should fix the issue.
10-06-2003 07:19 AM
Seems like its hitting the bug CSCdv43095. The workaround given in the bug should fix the issue.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: