You backup 1.5 gig, this is in bytes. Your link speed is 768k bites. So, divide 786 by 8 and you have 98.25 K bytes max throughput. Divide 1.5 gig by 98.25K, this gives you 15228 bytes/sec. Divide by 60 twice to get hours and you end up with 4.23 hours. You also have TCP packet overhead. Also, is this the only thing on the WAN? Sounds like your not doing to bad.
Yes, this is the only thing on the WAN. As for the duplex, I get no duplex mismatch errors. between the 3524 and the 2507, is set to full duplex and half between the 5500 and 3640. I will make the change and see if I see and improvement.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.