Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

SNMP rw community incorrect on Inventory RME 3.2

Why Check Device Attributes shows an incorrect rw snmp community for my 7507 and 7204VXR with this configuration?

access-list 1 permit 10.41.52.100

access-list 2 permit 10.6.61.40

access-list 2 permit 10.6.61.43

access-list 2 permit 10.6.61.76

snmp-server community supervisor RW 2

snmp-server community dealerro RO 1

snmp-server community dealerrw RW 1

snmp-server community nettuno RW 2

where 10.41.52.100 is my CW2000 server, dealerro and dealerrw are correct community.

Thanks.

2 REPLIES
Blue

Re: SNMP rw community incorrect on Inventory RME 3.2

If this device is under the Managed State in RME Inventory, do an Export to File and verify that the SNMP strings match with that configured on the device. If they do match, you can ignore the Check Device Attributes error which is most likely due to CSCds82356

New Member

Re: SNMP rw community incorrect on Inventory RME 3.2

Thanks for your answer.

Export file shows the correct string so I can ignore the error!

268
Views
0
Helpful
2
Replies
CreatePlease to create content