Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Attention: The Community will be in read-only mode on 12/14/2017 from 12:00 am pacific to 11:30 am.

During this time you will only be able to see content. Other interactions such as posting, replying to questions, or marking content as helpful will be disabled for few hours.

We apologize for the inconvenience while we perform important updates to the Community.

New Member

SNMP Trap Viewing/Listening

Is there some software from Cisco can be used as SNMP Trap Viewing or Listening? Or we have to use others, like HP OpenView?

4 REPLIES
Blue

Re: SNMP Trap Viewing/Listening

Device Fault Manager (DFM) comes with CW2000 bundle. Details can be seen at: http://www.cisco.com/warp/public/cc/pd/wr2k/dvftmn/

If you just want a simple free ware, windows based trap listener software you can look at: http://www.bttsoftware.co.uk/

New Member

Re: SNMP Trap Viewing/Listening

I know that DFM does listen for and process certain SNMP traps, but not all, and you can not display traps. For BTTSoftware, the tool does not have the feature like e-mail notifier, it is too simple. Any other comments?

Blue

Re: SNMP Trap Viewing/Listening

BTTSoftware is a free ware and does not have all the Bells and Whistles like others. HP OpenView can be looked at.

New Member

Re: SNMP Trap Viewing/Listening

Thanks a lot!

225
Views
0
Helpful
4
Replies
CreatePlease to create content