Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SNMP traps for Spanning tree on Cat6500 with IOS

I'm really afraid but I cannot find traps for Spanning tree in IOS for cat6500.

I'm pretty sure that using CatOS I got them.

Could you confirm me the lack of these traps ?

Thanks

Marco

  • Other Network Infrastructure Subjects
2 REPLIES
Anonymous
N/A

Re: SNMP traps for Spanning tree on Cat6500 with IOS

I wasn't able to locate the trap either but the support for the same seems to be there. Configuring SNMP (Cisco Catalyst 6500 series switches) at http://www.cisco.com/en/US/products/hw/switches/ps708/products_configuration_guide_chapter09186a008007f2de.html#30211 seems to suggest the same. You should probably also have a look at http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094a90.shtml. Lastly, even though I really wonder how useful this is going to be, the mib locator is located at http://tools.cisco.com/ITDIT/MIBS/servlet/index.

New Member

Re: SNMP traps for Spanning tree on Cat6500 with IOS

Thanks.

Main problem is that all these URL show CatOS configuration and never the IOS one for Cat6500 Native mode config.

I believed the config should have been the same as for the routers but it seems that the parameter here is not present.

Marco

111
Views
0
Helpful
2
Replies