The SNMP is a suite of 2 protocols: SNMP and SNMP-TRAP which you can manage what happens in your network, the network management uses this suite to monitor the devices.
You can use simultaneously both protocol because they have different port: SNMP (UDP/162) SYSLOG (UDP/514), but they are very similar; so I advice you to use a network management (SNMP) and disable SYSLOG on your devices.
Moreover the SNMPv3 is crypted meanwhile the SYSLOG is in clear text
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...