07-16-2003 12:04 PM - edited 03-02-2019 08:54 AM
I have a Router 3600 IOS 11.2(16)P, only when I use snmp version 1 the router reply, version 2c : Timeout no response from <ip address>.
Anybody knows how can I use version 2c ?
Thks,
Paulo
Solved! Go to Solution.
07-17-2003 01:40 AM
Hi,
SNMP v2c should be supported since IOS 11.3-1.T on 3600s.
Use Software Advisor -> Search by Release to check if your IOS supports the desired feature or Search by Feature to find the proper IOS version.
Advisor URL: http://www.cisco.com/cgi-bin/Support/CompNav/Index.pl
Regards,
Milan
07-17-2003 01:40 AM
Hi,
SNMP v2c should be supported since IOS 11.3-1.T on 3600s.
Use Software Advisor -> Search by Release to check if your IOS supports the desired feature or Search by Feature to find the proper IOS version.
Advisor URL: http://www.cisco.com/cgi-bin/Support/CompNav/Index.pl
Regards,
Milan
07-29-2003 07:56 AM
Ok, thks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide