Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements
Webcast-Catalyst9k
New Member

SNMPv3 on Catalyst 3500XL

I'm running 12.0(5)WC5 on a 3548XL, but I can find no way to make the switch accept an SNMPv3 user.

The commands I'm entering are as follows:

snmp-server view iso included

snmp-server group v3group v3 noauth read all write all

snmp-server user v3user v3group v3 auth md5 v3-passphrase

On a 1605R running 12.2(8)T4, these commands work... but not on my 3500s.

I'm trying to use this with NET-SNMP on a Linux box - traffic will be going over an untrusted network, so its desirable for me to at least guarantee its authenticity.

Can anybody help, or point me in the right direction?

Peter.

2 REPLIES
Blue

Re: SNMPv3 on Catalyst 3500XL

New Member

Re: SNMPv3 on Catalyst 3500XL

I looked at the URL yesterday, and unfortunately it wasn't much help in this case.

The problem appears to be with getting the switch to accept the "snmp-server user..." command. I'm convinced I'm doing something wrong here!

220
Views
0
Helpful
2
Replies
CreatePlease to create content