Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

SOHO 71 -Software-forced reload

Recently I have a SOHO 71 in my possession. After configure VPDN enable without no success. I decided to reload IOS image. I use console download by using Xmodem. After success download, router reboot and then goes in cycle that keep rebooting itself with follow message.

Any thought would be greatly appreciated. Kevin Chen

Cisco Internetwork Operating System Software

IOS (tm) SOHO71 Software (SOHO71-OY6-M), Version 12.2(11)YV, EARLY DEPLOYMENT RE

LEASE SOFTWARE (fc1)

Synched to technology version 12.2(13.1u)T

TAC Support: http://www.cisco.com/tac

Copyright (c) 1986-2003 by cisco Systems, Inc.

Compiled Tue 21-Jan-03 00:03 by ealyon

Image text-base: 0x800131C0, data-base: 0x8066A664

CISCO SOHO71 (MPC855T) processor (revision 0x401) with 14848K/1536K bytes of mem

ory.

Processor board ID VMS0615031D (236382490), with hardware revision D726

CPU rev number 5

Bridging software.

2 Ethernet/IEEE 802.3 interface(s)

128K bytes of non-volatile configuration memory.

8192K bytes of processor board System flash (Read/Write)

2048K bytes of processor board Web flash (Read/Write)

SYSTEM INIT: INSUFFICIENT MEMORY TO BOOT THE IMAGE!

%Software-forced reload

Unexpected exception to CPUvector 700, PC = 80133788

-Traceback= 80133788 80113ABC 801159D4 8010F104 8008E168 8008DFAC 800EF950 800EF

A50 80087BD8 80089598 8009A974 8009AA70 8009AB6C 80148860 80144328 8013E7E4 8014

6260

Program (breakpoint) Exception (0x700)!

CPU Register Context:

VEC = 700 PC = 80133788 MSR = 29032 CR = 33005055

LR = 80133738 CTR = 8006E6CC XER = 8000007F

R0 = 80133738 R1 = 80A11C60 R2 = 80910000 R3 = 8095EAB4

R4 = FFFFFFFE R5 = 0 R6 = 80A11C38 R7 = 80860000

R8 = FF000000 R9 = 0 R10 = 9032 R11 = 8095EA4C

R12 = 2268 R13 = FFF324E0 R14 = 369 R15 = 80976680

R16 = 1 R17 = 1 R18 = 800ED45C R19 = 14

R20 = 80A2ECAC R21 = 0 R22 = 806AC6E4 R23 = 0

R24 = 8010F100 R25 = 0 R26 = 8010F100 R27 = 1B0

R28 = 0 R29 = 80973C28 R30 = 0 R31 = 0

Stack trace:

PC = 80133788, SP = 80A11C60

Frame 00: SP = 80A11C60 RA = 80113ABC

Frame 01: SP = 80A11C70 RA = 801159D4

Frame 02: SP = 80A11C98 RA = 8010F104

Frame 03: SP = 80A11CD0 RA = 8008E168

Frame 04: SP = 80A11D20 RA = 8008DFAC

Frame 05: SP = 80A11D60 RA = 800EF950

Frame 06: SP = 80A11D70 RA = 800EFA50

Frame 07: SP = 80A11D90 RA = 80087BD8

Frame 08: SP = 80A11D98 RA = 80089598

Frame 09: SP = 80A11DC0 RA = 8009A974

Frame 10: SP = 80A11E10 RA = 8009AA70

Frame 11: SP = 80A11E40 RA = 8009AB6C

Frame 12: SP = 80A11E48 RA = 80148860

Frame 13: SP = 80A11E70 RA = 80144328

Frame 14: SP = 80A11E88 RA = 8013E7E4

Frame 15: SP = 80A11EB0 RA = 80146260

Frame 16: SP = 80A11EC0 RA = 80146454

Frame 17: SP = 80A12120 RA = 80067FE8

Frame 18: SP = 80A12128 RA = 80058108

Frame 19: SP = 80A12168 RA = 801384BC

Frame 20: SP = 80A12268 RA = 0

*** System received a Software forced crash ***

signal= 0x17, code= 0x700, context= 0x80976120

PC = 0x80133788, Vector = 0x700, SP = 0x80a11c60

System Bootstrap, Version 12.2(4r)XM1, RELEASE SOFTWARE (fc1)

TAC Support: http://www.cisco.com/tac

Copyright (c) 2001 by cisco Systems, Inc.

C800/SOHO series (Board ID: 17-117) platform with 16384 Kbytes of main memory

program load complete, entry point: 0x80013000, size: 0x345c8c

Self decompressing the image : #################################################

#########

2 REPLIES
Bronze

Re: SOHO 71 -Software-forced reload

This problem is caused by the following bugs:

CSCin20553 - Unable to load the soho71 image with 16 MB and the image crashes

CSCdz62947 - Memory:SOHO71 image reports insufficient memory with 16MB DRAM

The workaround is to

1. upgrade memory to 24 or 32MB

2. downgrade IOS

3. do not configure the vpdn enable global configuration command

New Member

Re: SOHO 71 -Software-forced reload

Please advise what part number for memory upgrade

What version of IOS is available for downgrade?

Thanks.

201
Views
0
Helpful
2
Replies