Ok so we have two labs and we are trying to send data between each and also within each lab. (The labs have Sun workstations in them.) When we transmit data between the machines in the one lab to machines in the same lab, the speed is fine. Also when we transmit data from either lab to the other lab, the speed is fine.
However, when we try transmitting data from one machine in the other lab to another machine in that same lab the speed is very slow.
We are also getting alot of input errors on the the ports that are connected to the machines in that lab with the slow speed. They include runts and CRC errors. Should I suspect the workstations first?
The operating system images are newer in the one lab so I asked that at least one machine in the "old" image lab be upgraded to the new image to see if that helps.
I have tried hooking the computers to another switch and the speed is fine and I am getting no input errors. When I put the computers back on the original switch the speed was almost the same. However, on computer in the same room the speed was very slow. What can this mean?
And the faster transfers were only transferring at about 10Mbps but they are 100Mbps so I dont knwow why they are so slow.
This is actually a pretty cool feature, i didn't even know it existed until I was looking for a solution to advertise a subnet (prefix in BGP talk), only if a certain condition existed. This is exactly what conditional advertisements does
j ai une question j ai achete un routeur cisco 887VA-k9 , je le configuré avec la configuration ci- dessous
si je le lier avec mon pc portable sur l un de ses ports directement ça marche toute est bien ( la connexion internet + m...
Attached policy provides CLI access to the Cisco 4G router over text messaging. Two files are in the attached .tar file:
2. PDF with instructions on how to load and use the .tcl file.