I have 4 boxes on the same subnet that are required to hit the same destination IP host address through two different WAN links.
One company bought another and we deal with both of them. The parent company wants all traffic to hit the same IP Host but they do not want to change their firewall rules to allow all traffic to go through a single WAN link.
So, the question is - is there any way to set up different routes to the same IP destination, based on the source IP of the box.
What you are looking for is called policy routing and on Cisco boxes it it implemented using route maps to define the policies and ip policy route-map statements on the interfaces the packets to be policy routed come in on. See http://www.cisco.com/warp/public/105/36.html for an explanation and example.
Hi everyone, I would like to thank you in advance for any help you can provide a newcomer like myself!
Im studying the 100-105 book by Odom and am currently on the topic of Port security. I purchased a used 2960 and I'm trying to follow a...
While deploying a number of 18xx/2802/3802 model access points (APs), which run AP-COS as their operating platform. It can be observed on some occasions that while many of their access points were able to join the fabric WLC withou...
I am going to design and build an LAN network under a tunnel underground with long distance between the switches.
I will have 2 Catalyst switches and 8 Industrial IE3000, and they will be connected with fiber.
For now I am planning on use Layer-2 s...