I'm trying to do Voice Monitoring via my CRA server. Topology looks like this:
CRA nic #2 (f3/44) -- Cat 6509 native IOS -- Cat 3550 -- (vlan 102) IP Phones (dynamicly set)
I don't think I'm getting packets from the cat 3550 to the cat 6509. I have setup vlan 202 as the RSPAN Vlan. Here is what I have. It looks like the 3550 is sending the packets to the redirect port 0/24 but I'm not getting any packets on 6509 3/44.
Question We run asr9001 with XR 6.1.3, and we have a very long delay to
login w/ SSH 1 or 2 to the device compare to IOS device. After
investigation, the there is 1s delay between the client KEXDH_INIT and
the server (XR) KEXDH_REPLY. After debug ssh serv...
Introduction The purpose of this document is to demonstrate the Open
Shortest Path First (OSPF) behavior when the V-bit (Virtual-link bit) is
present in a non-backbone area. The V-bit is signaled in Type-1 LSA only
if the router is the endpoint of one or ...
Hi, I am seeing quite a few issues with patch install and wanted to
share my experience and workaround to this. Login to admin via CLI, then
access root with the “shell” command Issue “df –h” and you’ll probably
see the following directory full or nearly ...