Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

spare part number for 6509

I have several Cat6509s and need some spare parts for it:

AC power cord (20Amps)

Face plate (filler) for the power supply

Face plate (filler) for blades

Does anyone know the part numbers to these items or how can I order them. Thanks.

--Chuck Deng

chuck007@yahoo.com

1 ACCEPTED SOLUTION

Accepted Solutions
Gold

Re: spare part number for 6509

AC power cable for 1300-Watt Power Supply (WS-CAC-1300W=) in North America is Cisco part number CAB-7513AC= This gets you a 14-ft. (4.3m) long, NEMA 5-20 plug, 125VAC 20-Amp cord.

Reference: Cisco Catalyst 6000 Series Switches - Preparing for Installation

http://www.cisco.com/en/US/products/hw/switches/ps708/products_installation_guide_chapter09186a008007eb89.html

List Price: US$25, available through any Cisco reseller.

"If the power supply bay is to remain empty, install a blank faceplate (Cisco part number 700-03104-01) over the opening, and secure it with the captive installation screw."

from Cisco Catalyst 6000 Series Switches - Removal and Replacement Guide

http://www.cisco.com/en/US/products/hw/switches/ps700/products_installation_guide_chapter09186a0080123ed8.html#16090

List Price: unknown. This part is not listed in Cisco's Distribution Product Reference Guide, so you may have to order this from Cisco direct. (Spare 1300W Power Supplies are available through distribution, though; if you can, you should probably just fill that empty power supply bay with one of these.)

"Verify that all empty module slots have blank faceplates (WS-X6K-SLOT-CVR) installed and that the screws holding the plates in place are tight."

from Cisco Catalyst 6000 Series Switches - Installing the Switch

http://www.cisco.com/en/US/products/hw/switches/ps700/products_installation_guide_chapter09186a0080123ed4.html

List Price: US$50, available through any Cisco reseller.

Note: The spare part should have a "=" after the part number, i.e. WS-X6K-SLOT-CVR=

Hope this helps.

2 REPLIES
Gold

Re: spare part number for 6509

AC power cable for 1300-Watt Power Supply (WS-CAC-1300W=) in North America is Cisco part number CAB-7513AC= This gets you a 14-ft. (4.3m) long, NEMA 5-20 plug, 125VAC 20-Amp cord.

Reference: Cisco Catalyst 6000 Series Switches - Preparing for Installation

http://www.cisco.com/en/US/products/hw/switches/ps708/products_installation_guide_chapter09186a008007eb89.html

List Price: US$25, available through any Cisco reseller.

"If the power supply bay is to remain empty, install a blank faceplate (Cisco part number 700-03104-01) over the opening, and secure it with the captive installation screw."

from Cisco Catalyst 6000 Series Switches - Removal and Replacement Guide

http://www.cisco.com/en/US/products/hw/switches/ps700/products_installation_guide_chapter09186a0080123ed8.html#16090

List Price: unknown. This part is not listed in Cisco's Distribution Product Reference Guide, so you may have to order this from Cisco direct. (Spare 1300W Power Supplies are available through distribution, though; if you can, you should probably just fill that empty power supply bay with one of these.)

"Verify that all empty module slots have blank faceplates (WS-X6K-SLOT-CVR) installed and that the screws holding the plates in place are tight."

from Cisco Catalyst 6000 Series Switches - Installing the Switch

http://www.cisco.com/en/US/products/hw/switches/ps700/products_installation_guide_chapter09186a0080123ed4.html

List Price: US$50, available through any Cisco reseller.

Note: The spare part should have a "=" after the part number, i.e. WS-X6K-SLOT-CVR=

Hope this helps.

New Member

Re: spare part number for 6509

konigl,

This is exactly what I was looking for. Thank you.

357
Views
0
Helpful
2
Replies