Stacking question

[pbogaerts]

Is it possible to stack two different models with the WS-X3500-XL. When it is possible i would like to stack a c2950G with a C3550-12T.

[lgijssel]

Yes, this is perfectly possible.

Regards,

Leo

[zerozerotito]

Certainly they can be stacked...

Pls. Check this out

http://www.cisco.com/en/US/products/hw/switches/ps5023/products_white_paper09186a00801b096a.shtml

Regards

Ahmet

[Wilson Samuel]

Hi Ahment,

The link you have pasted is about the Cisco StackWise Technology which is exclusively for Cisco 3750 Series Switches which is totally different from the Stacking mechanism.

Stacking could be well achieved between many models using GigaStack GBIC Modules.

Also the link below will give you the details about the same.

http://cisco.com/en/US/products/hw/modules/ps5455/products_data_sheet09186a00800a1789.html

[zerozerotito]

Oh, you are right, samuel....Sorry, Its my fault.

Here is the correct link as you mentioned...

http://www.cisco.com/en/US/products/hw/switches/ps646/products_data_sheet09186a00800a1789.html

[pbogaerts]

Thanks for the reply's, i thought that it was possible but wasn't 100% certain.

[Wilson Samuel · Accepted solution]

Hi Pbogaerts,

May I request you to rate the post as well as tick the box where it says that thread has solved your query.

Thanks for co-operation.

Regards,

Wilson Samuel