Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. If you'd prefer to explore, try our test area to get started. And see here for current known issues.

New Member

Start with a config via a flash card in a C3620

How can I start a special configuration stored in a flash card?

In class A routers, the command "boot config slot0:running.bin" is existing: what is the similar command or procedure to execut that?

I'm using a C3620 with a standard IP IOS.

Many thanks for your help.

  • Other Network Infrastructure Subjects
2 REPLIES
Silver

Re: Start with a config via a flash card in a C3620

A "copy slot0: running" would copy a configuration file from your slot0: into your running configuration and make that your new config.

Hope this is what you were asking for,

Don

New Member

Re: Start with a config via a flash card in a C3620

No! I would like to start a C3620 with the confing in the flash card, without CLI commands, automatically.

Like that, it's possible for a no technical person to start a router with the first or the second config, only plug the correct flash and reboot the router.

It's possible with the class A, with the command "boot config slot0:conf1.bin".

But thanks for you message and nice day,

Marc

89
Views
0
Helpful
2
Replies
This widget could not be displayed.