Cisco Support Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Announcements

Welcome to Cisco Support Community. We would love to have your feedback.

For an introduction to the new site, click here. And see here for current known issues.

New Member

Static mac address on catalyst 6500

I've a catalyst 6509 ios version:For some reason I've to put a static mac on 2 uplink port but the ios give me the possibility to put only 1 entry for the same mac.

I've tried to perform the same choice on cat-os switch and there are no problem.

Can anyone help me

Thanks in advance

2 REPLIES
Cisco Employee

Re: Static mac address on catalyst 6500

Hi,

You should only be able to configure a static MAC entry pointing to multiple ports if it is a multicast MAC address. However, you can configure multiple static unicast MAC address entries as long as each entry is in a different VLAN.

HTH,

Bobby

*Please rate helpful posts.

New Member

Re: Static mac address on catalyst 6500

Hi,

Is this still a limitation? Is there any workaround possible?

I can add a static unicast MAC address entry for two interfaces on a WS-C3750G-24TS-1U (Version 12.2(35)SE5):

--> mac-address-table static 02:00:5e:80:cc:02 vlan 2000 interface GigabitEthernet 13/1 GigabitEthernet 13/3

But on a cisco WS-C6513 (Version 12.2(33)SXI2a) it is not possible.

Best Regards,

Celso Ferreira

838
Views
0
Helpful
2
Replies
CreatePlease login to create content